Cisco认证知识:Switch命令大全(一)

来源:思科认证    发布时间:2012-11-09    思科认证视频    评论

  1.在基于IOS的交换机上设置主机名/系统名:

  switch(config)# hostname hostname

  在基于CLI的交换机上设置主机名/系统名:

  switch(enable) set system name name-string

  2.在基于IOS的交换机上设置登录口令:

  switch(config)# enable password level 1 password

  在基于CLI的交换机上设置登录口令:

  switch(enable) set password

  switch(enable) set enalbepass

  3.在基于IOS的交换机上设置远程访问:

  switch(config)# interface vlan 1

  switch(config-if)# ip address ip-address netmask

  switch(config-if)# ip default-gateway ip-address

  在基于CLI的交换机上设置远程访问:

  switch(enable) set interface sc0 ip-address netmask broadcast-address

  switch(enable) set interface sc0 vlan

  switch(enable) set ip route default gateway

  4.在基于IOS的交换机上启用和浏览CDP信息:

  switch(config-if)# cdp enable

  switch(config-if)# no cdp enable

  为了查看Cisco邻接设备的CDP通告信息:

  switch# show cdp interface [type modle/port]

  switch# show cdp neighbors [type module/port] [detail]

  在基于CLI的交换机上启用和浏览CDP信息:

  switch(enable) set cdp {enable|disable} module/port

  为了查看Cisco邻接设备的CDP通告信息:

  switch(enable) show cdp neighbors[module/port] [vlan|duplex|capabilities|detail]

  5.基于IOS的交换机的端口描述:

  switch(config-if)# description description-string

  基于CLI的交换机的端口描述:

  switch(enable)set port name module/number description-string

  6.在基于IOS的交换机上设置端口速度:

  switch(config-if)# speed{10|100|auto}

  在基于CLI的交换机上设置端口速度:

  switch(enable) set port speed moudle/number {10|100|auto}

  switch(enable) set port speed moudle/number {4|16|auto}

  7.在基于IOS的交换机上设置以太网的链路模式:

  switch(config-if)# duplex {auto|full|half}

  在基于CLI的交换机上设置以太网的链路模式:

  switch(enable) set port duplex module/number {full|half}

  8.在基于IOS的交换机上配置静态VLAN:

  switch# vlan database

  switch(vlan)# vlan vlan-num name vla

  switch(vlan)# exit

  switch# configure teriminal

  switch(config)# interface interface module/number

  switch(config-if)# switchport mode access

  switch(config-if)# switchport access vlan vlan-num

  switch(config-if)# end

  在基于CLI的交换机上配置静态VLAN:

  switch(enable) set vlan vlan-num [name name]

  switch(enable) set vlan vlan-num mod-num/port-list

  Cisco认证知识:Switch命令大全(二)

上一页12下一页

视频学习

我考网版权与免责声明

① 凡本网注明稿件来源为"原创"的所有文字、图片和音视频稿件,版权均属本网所有。任何媒体、网站或个人转载、链接转贴或以其他方式复制发表时必须注明"稿件来源:我考网",违者本网将依法追究责任;

② 本网部分稿件来源于网络,任何单位或个人认为我考网发布的内容可能涉嫌侵犯其合法权益,应该及时向我考网书面反馈,并提供身份证明、权属证明及详细侵权情况证明,我考网在收到上述法律文件后,将会尽快移除被控侵权内容。

最近更新

社区交流

考试问答