实验过程：
　　第一步：在R1 进行流量整形
　　R1(config)#map-class frame-relay CIR
　　R1(config-map-class)#frame-relay traffic-rate 19200
　　R1(config-map-class)#exit
　　R1(config)#int s3/0
　　R1(config-if)#frame-relay traffic-shaping
　　R1(config-if)#int s3/0.1
　　R1(config-subif)#frame-relay class CIR
　　R1(config-subif)#int s3/0.2
　　R1(config-subif)#frame-relay class CIR
　　第二步：在R2上进行流量整形。
　　R2(config)#map-class frame-relay CIR
　　R2(config-map-class)#frame-relay traffic-rate 19200
　　R2(config-map-class)#exit
　　R2(config)#int s3/0
　　R2(config-if)#frame-relay class CIR
　　第三步：查看更为详细的流量整流的统计结果
　　R1#show frame pvc 102
　　PVC Statistics for interface Serial3/0 (Frame Relay DTE)
　　DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial3/0.1
　　input pkts 0 output pkts 0 in bytes 0
　　out bytes 0 dropped pkts 0 in pkts dropped 0
　　out pkts dropped 0 out bytes dropped 0
　　in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
　　out BECN pkts 0 in DE pkts 0 out DE pkts 0
　　out bcast pkts 0 out bcast bytes 0
　　5 minute input rate 0 bits/sec, 0 packets/sec
　　5 minute output rate 0 bits/sec, 0 packets/sec
　　pvc create time 00:50:40, last time pvc status changed 00:50:40
　　cir 19200 bc 19200 be 0 byte limit 300 interval 125
　　mincir 9600 byte increment 300 Adaptive Shaping none
　　pkts 0 bytes 0 pkts delayed 0 bytes delayed 0
　　shaping inactive
　　traffic shaping drops 0
　　Queueing strategy: fifo
　　Output queue 0/40, 0 drop, 0 dequeued
　　R2#show frame pvc 201
　　PVC Statistics for interface Serial3/0 (Frame Relay DTE)
　　DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial3/0
　　input pkts 0 output pkts 0 in bytes 0
　　out bytes 0 dropped pkts 0 in pkts dropped 0
　　out pkts dropped 0 out bytes dropped 0
　　in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
　　out BECN pkts 0 in DE pkts 0 out DE pkts 0
　　out bcast pkts 0 out bcast bytes 0
　　5 minute input rate 0 bits/sec, 0 packets/sec
　　5 minute output rate 0 bits/sec, 0 packets/sec
　　pvc create time 00:49:50, last time pvc status changed 00:49:37考试大等级站收集整理!

上一页12下一页