13.Your Windows NT Server computer  is configure with six SCSI hard disks.One hard disk is the system disk,and the other five are configured as a stripe set with parity.  

After a power outage,your server reboots,and you discover that two of the five hard disks in the stripe set wiyh parity have failed.You replace both failed hard disks.  

What else should you do to recover from the hard disk failure?  

A.Regenerate the stripe set with parity by using Disk Administrator.  
B.Wait for Windows Nt server to regenerate the stripe set with parity.  
C.Create a stripe set across all five hard disks,and then restore from tape bacpup.  
D.Create a stripe set with parity across all five disks,and then restore from tape backup.  

d  
**14.After you install a new device driver for a SCSI hard disk, you discover that your Windows NT Server computer will not start.You do not have the Windows NT setup disks but you have an Emergency Repair disk.  

What must you do to recover the system?(Choose two.)  

A.Create the Windows NT setup disks by using the Winnt.  exe program on anthor computer.  
B.Restore the registry from the Emergency Repair disk by using the Rdisk.exe utility.  
C.Boot with the Emergency Repair disk and recover the registry.  
D.Boot with the Windows NT setup disks and restore the registry from the　Emergency Repair disk.  
a d  
15.You install Windows NT Server without creating an Emergency Repair disk. You then configure several SCSI devices and printers.You want to back up the configuration settings so that you can quickly restore the computer in the event of a startup failure.  

How should you do this?  

A.Save a copy of the registry by using the Windows NT Backup program.  
B.Save all configuration information to disk by using Disk Administrator.  
C.Make a copy of the registry hives by using Save Key in the Registry Editor.  
D.Create an Emergency Repair disk with the current configuration settings by using the Rdisk.exe utility.  
d 

上一页678下一页