answer: a
note: there are 4 answers,one with the word’latancy’,the other is with ’wire
speed’ and these two are nothing with the question.But the fragment just read
the first 64 bytes before forward,and nothing with the remained two answer,i
think there may be a bug. so i chose ’a’

8.identify the start-up file loading from the ’exibit’ about the router’s setup

9.to retrieve the config file:copy start run

10.encapsulation: there are 2 items which would give you a graphic about
several node with some encapsulation type.the graphic is just the same one on
the ICND book.just remember to communication,the encapsulation type on both end
must be the same.

11.which command can show you the DLCI’s: show frame-relay

12.what is ’ipx access-list 1 deny 2b 4a’ stand for?

13.config the igrp,which is right?
a.igrp 100 network 192.168.1.0 network 10.0.0.0
b.igrp 100 network 192.168.1.0 network 10.2.0.0
answer: a

14.what is VLAN ’s benifit: increase the broadcast domain

15.router segement benifit:one broadcast domain,one colliction domain per
segment

16.after you have delete the startup-configration in the NVram,what mode would
you in when you start the router again? setup mode

17.to config the initial configuration of the router,which type will you in?
setup mode

18.which command to set serial0’s clock? clock rate 56000 s0

19.the concept about the oriented connection.

20.which layer should icmp belongs to :network layer

21.which command to show the details of the access-list? show access-lists

上一页12下一页