6: Which of the following prompts indicates your router is in Privileged EXEC mode?
A. Router>
B. Router#
C. Router&
D. Router$
 
7: You have made a console connection to your Cisco Catalyst switch and you see the > symbol in HyperTerminal. What does it mean?
A. You are in Privileged EXEC mode.
B. You are in User EXEC mode.
C. The switch has not been configured.
D. The switch is in need of repairs.
 
8: You would like to assign a meaningful name to your Catalyst switch. What command should you use?
A. enable
B. host name
C. hostname
D. name
 
9: You need to assign an IP address to your Catalyst 2950 switch. You are at the HQ_SW1> prompt. What is the correct series of commands? (cr = carriage return)
A. enable ip address 10.1.1.1
B. enable ip address 10.1.1.1 255.255.255.0
C. enable configure terminal ip address 10.1.1.1 255.255.255.0
D. enable configure terminal interface vlan 1 ip address 10.1.1.1 255.255.255.0
 
10: Which of the following commands displays the syntax for the clock command?
A. cl?
B. clock?
C. clock ?
D. cl ?
11: Which of the following commands allows you to configure a welcoming message whenever you log in to a router?
A. Router(config)# banner message
B. Router(config)# banner motd &
C. Router# banner motd #
D. Router# banner message !

上一页123456下一页