6. Which of the following NSAP addresses is a private, locally administered address?
A. 39.0f01.0002.0000.0c00.1111.00
B. 48.0f01.0002.0000.0c00.1111.00
C. 49.0004.30ac.0000.3090.c7df.00
D. 52.0f01.0002.0000.0c00.1111.00
Answer: C

7. Router RTA is configured as follows:
RTA (config)#router rip
RTA(config-router)#network 10.0.0.0
RTA(config-router)#distribute-list 44 in interface BRI0
RTA(config-router)#exit
RTA(config)#access-list 44 deny 172.16.1.0 0.0.0.255
RTA(config)#access-list 44 permit any
What are the effects of this RIP configuration on router RTA? (Choose two.)
A. no routing updates will be sent from router RTA on interface BRI0 to router RTX
B. router RTA will not advertise the 10.0.0.0 network to router RTX
C. the route to network 172.16.1.0 will not be entered into the routing table on router RTA
D. user traffic from the 172.16.1.0 network is denied by access-list 44
E. the routing table on router RTA will be updated with the route to router RTW
Answer: CE

8. A router is configured for redistribution to advertise EIGRP routes into OSPF on a boundary router. Given the configuration:
router ospf 1
redistribute eigrp 1 metric 25 subnets
What is the function of the 25 parameter in the redistribute command?
A. It specifies the seed cost to be applied to the redistributed routes.
B. It specifies the administrative distance on the redistributed routes.
C. It specifies the metric limit of 25 subnets in each OSPF route advertisement.
D. It specifies a new process-id to inject the EIGRP routes into OSPF.
Answer: A

9. Which two methods advertise internal networks to external ISPs via BGP? (Choose two.)
A. using aggregate routes
B. disabling synchronization
C. forcing the next-hop address
D. defining routes via the network statement
Answer: AD

10. Place the BGP attributes in the correct order used for determining a route